1.This reverse flow valve can be used with GA series regulator but can not be ordered individually.
2.When it is used with GA series regulator, one only needs to change the seal board in the back of regulator for the reverse flow valve. It is convenient to install and won’t change the external dimension of regulator.
Product Feature
1.It is installed between G series regulator (or filter & regulator) and G series Lubricator. The air flow is divided by the device that one enters Lubricator to supply oil for lubrication and the other (the second way) directly enters the equipment.
2.Several kinds of bracket can be ed to connect regulator and lubricator. Optional brackets are type T, type L and type U.
Installation & Usage
1.Check whether the components have been damaged during transportation before installing and using.
2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.
3.Please notice whether installation condition accords with technical requirements (such as “working pressure” and “applied temperature range”);
4.Avoid usage in an environment that exposes the filter and lubricator bowl through contact with Chlorine, solvent, aromatic essence, acid and alkali to avoid damage to the Filter and Lubricator bowl.
5.Regularly clean or change filter core. Lubricators and regulators shall be in descending order.
6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.
Product Feature
1. The short PC bowl type is upgraded GA200 series. Besides its speciality are the same as GA200 series, it’s below speciality:
2. The bowl is made of PC and is short which allows for litter space application.
3. Two drain types are available: semi-auto drain, and automatic drain.
Product Feature
1.The structure of oil dripping adopts gap seal type, which makes the adjustment of oil supply more reliable.
2.Oil feed ring can only make one full turn. The quantity of oil supply basically takes on linear distribution. The quantity of oil supply can be generally calculated according to the position of graduation ring.
3.Special drip nozzle structure will produce negative pressure in oil dripping outlet and the mist flow is minimal.
4.Three material of bowl are available: PC, Nylon and metal.
5.Filling of oil while the lubricator is under pressure is made possible, and the oil bowl is large.
6.The bracket can be ed for installation.
Product Feature
1.Circular square pressure gauge which with clip and magnifier is used to save installation space.
2.The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.
3.Balanced design is adopted for the pressure adjustment mechanism.
4.In addition to panel installation, the bracket is optional for installation.
Product Feature
1.Unique diversion structure spins the air flowing through to effectively separate the liquid from the air and reliably filter the solid grain.
2.It has low pressure loss, high efficiency in separating water and large drain bowl capacity.
3.Filtering grade includes 5μm and 40μm (Optional).
4.Three drain types are available: manual drain, semi-auto drain and automatic drain.
5.Two drain types are available: semi-auto drain and automatic drain.
6.Three material of bowl are available: PC, Nylon and metal.
7.The bracket can be ed for installation.
Product Feature
1.Circular square pressure gauge which with clip and magnifier is used to save installation space.
2.The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.
3.Balanced design is adopted for the pressure adjustment mechanism.
4.Unique diversion structure spins the air flowing through to effectively separate the liquid from the air and reliably filter the solid grain.
5.The filtering grade includes 5μm and 40μm (optional).
6.Two drain types are available: semi-auto drain and automatic drain.
7.Three material of bowl are available: PC, Nylon and metal.
8.The bracket can be ed for installation.
Product Feature
1.Quick and reliable mounting clamps makes it convenient to install and use.
2.The performance of pressure adjustment is reliable with high precision.
3.The efficiency of eliminating moisture and solid grain is high.
4.Two drain types are available: manual drain+semi-auto drain and automatic drain.
5.Three bowl materials are available: PC, Metal and Nylon.
Product Feature
1.Oil dripping adopts gap seal structure, which makes the adjustment of oil supply more reliable.
2.Oil feed ring can only make one full turn. The quantity of oil supply, basically taking on linear distribution. The quantity of oil supply can be generally calculated according to the position of graduation ring.
3.Filling of oil while the lubricator is under pressure is made possible.
4.Special drip nozzle structure will produce negative pressure in oil dripping outlet and the mist flow is minimal.
5.Quick and reliable mounting clamps makes it convenient to install and use.
6.The performance of pressure adjustment is reliable with high precision.
7.The efficiency of eliminating moisture and solid grain is high.
8.Two drain types are available: manual drain+semi-auto drain and automatic drain.
9.Three bowl materials are available: PC, Metal and Nylon.
